Deltec AP902 Skimmer

US Product Page

Air is drawn in automatically through an air intake adaptor. The rotation of the water/air mixture provides a long contact time with the pollutants resulting in a highly efficient performance. The extremely fine water/air mixture is pumped into the contact tube, where it rises and is collected in a removable cup at the top of the skimmer.

When a skimmer is running it will produce a head of foam which is determined by the amount of air and the bubble size. A simple general way of comparing the relative performance of a skimmer without even running it is to look at the neck diameter where it enters the cup. The larger this is, the greater the performance, as it takes a greater head of foam to be able to climb up a larger diameter tube.

The riser tube diameter of the AP902 is 5.5". Compare that with your existing skimmer and you will understand what we are talking about. Tapered tubes simply reduce the opening to cope with a smaller volume of foam.

Technical Data

• AP902 Skimmer : Article No. 88006 
• Can be stood either in or beside a sump or beside the aquarium.
• Can be gravity or pump fed (supply pump not supplied).
• Water throughput - 800 USgallons/hr.
• Self cleaning head - Item 88101 (increases performance by 20%)
• 1200 litres of air/hr are produced at the venturi.

Dimensions: 

• L 19.3" W 19.3 H 38.6" (allowing for removal of the cup)
• Hard pipe connections - Supply - 1" Return - 1.5"

  Skimmer body - 250mm diameter

• Riser tube - 140mm diameter

 Stocking:

• Normal Stocking 700 US gallons
• Heavy Stocking 500 US gallons